Applications / Fitment Guide

Important installation information:

*We require that the valve stems for all wheels (duals and triples) at each equipment corner line up with each other (within one lug bolt hole).  This gives us the repeatability that all XX size wheels on YY spacing will use the same length hoses.  If stems are not already lined up this may require duals be unbolted and rotated.

*For bar axle duals, a 3/4  inch (19mm) hole will need drilled through the outer wheel center for the hose to pass thru (CNH tractor owners, this will be both the inner and outer wheels).

 *Tire Minders may be used on wheels which have tubes installed, but the strength needed to prevent hoses or gauge blocks from being ripped off in mud or debris is compromised.  Tubes use rubber base valve stems with little metal in them.  Let us know if tubes are used and we can supply a metal nut to replace the plastic nut used with most tubes on the valve stem.

CNH MX MFWD single front tires with 8 position wheels.

click on image to enlarge